TM9-2360-222-20-1-3
PRIMER PUMP REPLACEMENT (EARLY MODEL) (Shoot 4 of 4)
5.
Using 9/16 inch wrench, install inlet tube (E)
and heater tube (F) on tee (C).
Using 9/16 inch wrench, install outlet tube
6.
(G) on adapter (D).
7.
Apply silicone compund (Item 32, Appendix)
(D) to two electrical connectors (H).
8.
Connect two electrical connectors (H) located
on handle support bracket (J) by pushing
together.
9.
Raise handle to up position. Using 7/16 inch
wrench, install wire bracket (K) with bolt (L).
TA253257
End of Task
7-358.6