TM9-2350-222-20-1-3
FUEL PRIMER/ENGINE FEED TUBE ASSEMBLY REPLACEMENT (LATE MODEL) (sheet 1 of 4)
5/8 in. combination box and open end wrench
TOOLS:
11/16 in. combination box and open end wrench
7/16 in. combination box and open end wrench
7/8 in. combination box and open end wrench
1 in. combination box and open end wrench
1-1/8 in. open end wrench
12 in. adjustable wrench (2 required)
7/16 in. socket with 1/2 in. square drive
Lockwasher (MS 35338-44)
SUPPLIES:
REFERENCE: TM 9-2350-222-10
PRELIMINARY PROCEDURES: Remove powerplant (page 5-1)
REMOVAL:
Using 7/16 inch wrench to hold nut (A), use
1.
7/16 inch socket to remove screw (B) and
lockwasher (C). Throw lockwasher away.
Using adjustable wrench to hold elbow (D),
2.
use 1-1 /8 inch wrench to remove hose assem-
bly, (E) from elbow (D). Remove clamp (F)
from hose assembly (E).
TA253324
Change 17-357
Go on to Sheet 2