PRIMARY FUEL FILTER ELEMENT REPLACEMENT (2D ENGINE) (Sheet 3 of 5)
CLEANING AND INSPECTION:
Using clean rags (Item 66, Appendix D), clean inside of filter body and around filter body rim.
Inspect filter body and cover for cracks, holes, or dents on sealing edges.
Replace any damaged parts.
Install washer (A), new gasket (B) from parts
kit, and cover (C) on screw (D).
Do not tighten nut (E) down
Leave enough nut
showing to allow removal.
Using 9/16 inch wrench and adjustable wrench,
install nut (E) on screw (D) and tighten nut (E).
Install new gasket (F) from parts kit into seat
on inside of cap (C).
Go on to Sheet 4