TM9-2350-222-20-1-3
FUEL INLET FLUID PRESSURE FILTER REPLACEMENT (Sheet 3 of 3)
INSTALLATION:
Apply sealing compound (Item 23, Appendix D)
1.
to threads of adapter (A) and tee connector (B).
Using 1/2 inch wrench, install adapter (A) in
2.
filter (C).
3.
Using adjustable wrench, install tee connector
(B) in filter (C).
4.
Using screwdriver, install two screws (D) and
vehicle.
5.
Aline three lines (F), (G), and (H) with tee
connector (B) and adapter (A).
6.
Using 9/16 inch wrench, tighten connector on
line (G).
7.
Using 9/16 inch wrench, tighten connector on
line (F).
8.
Using 1/2 inch wrench to hold adapter (A),
use 9/16 inch wrench to tighten connector (H)
onto adapter (A).
Start engine and check for leaks (TM
9.
9-2350-222-10).
End of Task
TA253239
Change 1 7-293