TM9-2350-222-20-1-3
INTER-TANK SWING CHECK VALVE REPLACEMENT (Sheet 3 of 5)
10.
Using 1 inch wrench on fuel line (P) and 7/8 inch wrench on elbow (Q), loosen fuel line (P) from
elbow (Q).
Using 7/8 inch wrench, remove elbow (Q) from
11.
check valve (N). Use vise if necessary.
Using 7/16 inch socket, remove screw,
12.
lockwasher, and washer (S) holding clamp (T) to
fuel tank. Throw lockwasher away.
13.
Remove clamp (T) from fuel line (L).
14.
Using 1 inch wrench on fuel line (L) and 7/8 inch wrench on elbow (R), loosen fuel line (L) from
elbow (R) (located behind left fuel tank rear mount).
Using 7/8 inch wrench, remove elbow (R) from left fuel tank.
15.
16.
Remove fuel line (L).
INSPECTION:
Inspect threaded parts for bad threads. Check tubing for cracks or bends. Replace defective parta.
INSTALLATION:
1.
Using 7/8 inch wrench, install elbow (A) to left
fuel tank.
Using 1 inch wrench, install fuel line ) to
2.
elbow (A).
Go on to Sheet 4
TA148997
7-237