TM
9-2350-222-20-1-3
RIMER PUMP TO BULKHEAD UNION FUEL LINES REPLACEMENT (EARLY MODEL) (Sheet 5 of 6)
Position tube assembly (P) to nipple (K) and tee (Q).
8.
Using 5/8 inch wrench to hold nipple (K) use 5/8 inch wrench and connect tube nut (R) to nipple (K).
9.
10. Using 5/8 inch wrench, connect tube nut (S) to tee (Q)
position tube assembly (U) to nipple (K) and adapter (V).
Using 5/8 inch wrench to hold nipple (K) use 5/8 inch wrench and connect tube nut (W) to nipple (K).
12.
13. Using 5/8 inch wrench connect tube nut (X) to adapter (V).
14. Check all connections for tightness, tighten as required.
15. Operate primer pump (TM 9-2350-222-10) and check for leaks. Correct leaks as necessary.
16. Using rags (Item 65, appendtix D) clean all fuel spillage.
TA253308
of Task
Change 1 7-227
(7-228 through 7-234 deleted)