TM9-2350-222-20-1-3
FUEL SHUTOFF VALVE, LEVER, LINK, AND BRACKET REPLACEMENT (EARLY MODEL)
(Sheet 3 of 9)
5.
Using 1-1 /8 inch wrench, remove tube nut (F)
from elbow (G).
6.
Using plastic cap, cap end of hose (H) to
prevent fuel loss.
7.
Using adjustable wrench to hold elbow (J), use 1 inch wrench to remove tube nut (K) from elbow
(J).
8.
Using adjustable wrench to hold elbow (J), use 1-1/8 inch wrench to loosen nut (L) about 1/2 turn.
9.
Using adjustable wrench, remove elbow (J)
with nut (L), washer (M), and preformed
packing (N) from fuel shutoff valve as an
assembly.
10. Manually remove preformed packing (N) and washer (M) from elbow (J). Throw preformed
packing (N) away.
11. Using adjustable wrench to hold elbow (J), use 1-1/8 inch wrench to remove nut (L) from elbow (J).
Go on to Sheet 4
TA253274
Change 1 7-199