TM9-2350-222-20-1-3
FUEL TANK CROSSOVER VALVE REPLACEMENT (Sheet 6 of 7)
7.
Using torque wrench, tighten three screws (E) and (H) to 13-18 lb-ft (18-24 Nm).
8.
Using slip joint pliers, install new lockwire (K) (Item 59, Appendix D) in three screws (E) and (H).
NOTE
The following steps of valve installation will be performed in
engine compartment.
9.
Using torque wrench, tighten the remaining five screws (E) and (H) to 13-18 Ib-ft (18-24 Nm).
10. Using slip joint pliers, install new lockwire (K) (Item 59, Appendix D) in five screws (E) and (H).
TA253271
Go on to Sheet 7
Change 1 7-195