TM 9-2360-222-20-1-3
FUEL TANK CROSSOVER VALVE REPLACEMENT (Sheet 4 of 7)
10. Using dry cleaning solvent (Item 54, Appendix D), rags (Item 65, Appendix D), and putty knife,
clean excess material from fuel tank.
NOTE
The following steps of valve installation will be performed in
engine compartment.
INSTALLATION:
Install new gasket (A), crossover valve (B), and preformed hose (C) to right fuel tank (D) using five
1.
screws (E) and washers (F).
Install preformed hose (C) to left fuel tank (G) using five screws (H) and Washers (J).
2.
Using 1/2 inch wrench, tighten five screws (E) and five screws (H).
3.
Go on to Sheet 5
TA141579
7-193