FUEL TANK (LEFT AND RIGHT) CONDENSATE RELIEF VALVE REPLACEMENT
Sheet 3 of 4)
CLEANING AND INSPECTION:
Using dry cleaning solvent (Item 54, Appendix D), clean all components.
Inspect components for cracks or breaks. Replace unserviceable components.
Using 6 inch ruler, check that free length of spring (C)is 1 inch long or longer.
Position three ball bearings (A), new preformed packing (B), and spring (c) on pipe adapter (D).
Press lockring (E) down on sleeve (D).
Using snap ring pliers, install retaining
Remove rags from fuel tank.
3.1. Apply a coat of grease (Item 36, Appendix
D) to threads of sleeve (D).
Using wrench, install sleeve (D) in fuel
Press down on lockring (E) and install
Using slip joint pliers, install chain (J) on
Go on to Sheet 4
Change 1 7-173