FUEL TANK (LEFT AND RIGHT) LEVEL GAGE TRANSMITTER REPLACEMENT
(Sheet 4 of 4)
Using screwdriver, install five screws and
washers (F) securing transmitter (C) to fuel
Secure screws (F) with new lockwire (G)
(Item 59, Appendix D).
Connect electrical connector (H) to
Check fuel gage for proper operation (TM
Steps 10 thru 16 apply only to right fuel g a g e transmitter.
Place cover (J) in position over transmitter (C)
and install screw and lockwasher (K).
Position safety chain (L) on cover (J) and install
flat washer, new lockwasher, and screw (M).
Position bracket (N) on cover (J) and install screw and washer (P).
Using 1/2 inch socket, tighten three screws and new lockwashers (K), (M), and (P) securing cover
(J) to fuel tank.
Install screw, new lockwasher, washer, and nut (Q) securing clamp to bracket (N).
Using wrench to hold nut, use 7/16 inch socket to tighten screw (Q).
Check fuel gage for proper operation (TM 9-2350-222-10).
Close top deck grille doors (TM 9-2350-222-10).
End of Task