DRAINING FUEL TANK AND REMOVING CONDENSATE (Sheet 3 of 7)
Steps 2 and 3 apply to removal of dust covers from hand fuel
pump and hoses.
Using fingers in clamp ring (D), pull clamps (E)
out and down against body of connector (F) to
loosen dust cover (G).
Remove dust cover (G) from connector (F).
Install hose (H) on connector (F) on discharge
side of hand fuel pump (A).
Using fingers in clamp ring (D), pull clamp
(E) out and up against hose (H) to clamp hose
(H) in place.
Repeat steps 4 and 5 for installing hose on
connector on suction side of hand fuel pump
Go on to Sheet 4