TM 9-2350-222-20-1-3
AIR CLEANER FILTER ELEMENT CLEANING OR REPLACEMENT (TOP LOADING)
(Sheet 2 of 5)
REMOVAL:
WARNING
CAUTION
If NBC exposure is suspected, all air fil-
When moving filter element (C), use care
ter media should be handled by personnel
not to damage filter seal (E). Do not stand
wearing protective equipment. Consult
filter element on seal end.
your unit NBC Officer or NBC NCO for ap-
propriate handling or disposal instruc-
tions.
6.
Close door (B) to keep out dust.
To prevent screws from pulling out of
box and injuring personnel, a minimum of
200 pounds must be placed on top of the
door before attempting to remove the
screws.
1.
Using socket, loosen three screws (A)
and remove from door (B).
2.
Open door (B) until it rests on rear
fender box.
Inspect gasket on door (B). If damaged,
3.
4.
Slide filter element (C) toward front of
tank.
5. Carefully lift filter element (C) out of air
cleaner housing (D).
Goon to sheet 3
Change 3 7-111