AIR CLEANER REPLACEMENT (TOP LOADING) (Sheet 7 of 8)
Position fender skirt (H).
Using 9/16 inch socket, install two new
locknuts (J) and washers (K) to hold fender
skirt (H) to both outriggers.
Coat four screws (L) with lubricant (Item 40,
Using 9/16 inch socket, install four new
self-locking bolts (L) and washers (M) to hold
fender skirt (H) to air cleaner (N).
Using torque wrench and 9/16 inch socket,
tighten four screws (L) to 20-30 lb-ft (27-41
Install washer (P) and bolt (Q) from top of fender skirt.
Install bolt (Q) through washer (P) and fender skirt.
Place washer (R), new lockwasher (S), and nut (T) on bolt (Q). Using 9/16 inch socket on bolt (Q)
and 9/16 inch open end wrench on nut (T), tighten nut (T).
Go on to Sheet 8