AIR CLEANER REPLACEMENT (TOP LOADING) (Sheet 2 of 8)
If equipped with 2DA engine, disconnect dust
Open top deck grille door (TM 9-2350-222-10).
Using 3/8 inch wrench, loosen clamp (A) nut
securing inlet hose (B) to inlet elbow (C).
Separate hose (B) far enough from inlet elbow
(C) to allow air cleaner to be removed without
Pull air cleaner electrical lead (D) from harness
RIGHT AIR CLEANER
4.1. If removing right air cleaner, use 9/16 inch
wrench to disconnect fuel tank vent hose (El)
from elbow, if equipped.
4.2. If removing left air cleaner, use 11/16 inch
wrench to disconnect finaI drive vent line (E.2)
and remove adapter (E.3) from inlet elbow (C),
Go on to Sheet 3