AIR CLEANER INTAKE AND HOSE REPLACEMENT (Sheet 4 of 5)
Position gasket (B) over studs on flange (C).
Position intake (D) over studs on flange (C).
(E) to secure intake (D) and flange (C).
Using 9/16 inch socket and universal
joint, tighten nuts (E).
Position hose (F) and clamp (G) onto flange (C)
and, using 3/8 inch wrench, tighten nut (H) on
clamp (G) securing hose (F) to flange (C).
Position intake (D) and flange (C) assembly
(assembled in steps 1 through 4) with flange (C)
toward engine, over studs on bulkhead.
secure intake and flange assembly to bulkhead.
Using 9/16 inch socket, tighten nuts (J).
Go on to Sheet 5