TM9-2350-222-20-1-3
AIR CLEANER INTAKE AND HOSE REPLACEMENT (Sheet 3 of 5)
12. Using 9/16 inch socket and universal joint,
13. Using wrench, loosen clamp nut (L) at end of
intake hose (B) and remove clamp (M).
14. Remove hose (B) from flange (N).
15.
Separate intake (P) from flange (N).
16.
Clean and inspect gasket (Q).
17.
If gasket (Q) is damaged, replace.
18.
Inspect and replace studs (R) in flange (N) as necessary.
Go on to Sheet 4
7-84
Change 4