AIR CLEANER OUTLET HOSE ASSEMBLY REPLACEMENT (Sheet 2 of 3)
Pull pin (A) and release quick release
Remove quick release clamp (B) from
hose and elbow.
Using socket, loosen nut (C) securing
Remove hose assembly (E).
Remove clamp (D).
Cover air cleaner outlet elbow and turbosupercharger inlet elbow with rags to prevent
e n t r a n c e of foreign matter.
Inspect hose assembly (E) for damage or defective parts. Replace hose assembly if hose
or flange is unserviceable.
If hose (F) is serviceable, remove preformed
packings (G) from ends of hose assembly
flanges. Throw packings away. Using
knife, clean old adhesive from grooves
If installing new hose assembly, skip steps 1 and 2.
Apply adhesive (Item 4, Appendix D) to
grooves in flanges in hose (A).
Install new preformed packings (B) into
grooves in flanges.
Go on to Sheet 3