FUEL PUMP REPLACEMENT - LEFT FUEL TANK (Sheet 7 of 9)
Install clamp (Q) on each end of hose (R).
It may be necessary to turn fuel
pump (B) 1/4 turn in order to
install hose (R) onto fuel pump
Install hose (R) between fuel pump outlet (S)
and fuel line (T). Using screwdriver, tighten
screws on clamps (Q).
Turn fuel pump (B) so electrical connector (J) is
clear of top clamp (Q). Using hands, connect
electrical connector (U) at back of capacitor
housing (V) to electrical connector (J).
Using 1/2 inch wrench to hold screw (L), use
socket and tighten nut (P).
Go on to Sheet 8