TM9-2350-222-20-1-3
ENGINE FUEL PUMP REPLACEMENT (Sheet 3 of 4)
CLEANING AND INSPECTION:
1.
Using rags and dry cleaning solvent, (Items 65 and 54, Appendix D), clean fittings and mounting
hardware thoroughly,
2.
Inspect fittings and mounting hardware for nicks, cracks, wear, or thread damage. Replace if
required.
INSTALLATION:
1.
Using fingers, install new gasket (A) on mounting studs (B).
NOTE
Coat threads of all fittings with sealing compound (Item 27,
Appendix D).
2.
Using 3/4 inch wrench, install adapter (C).
3.
Using both hands, carefully install fuel pump assembly (D) on mounting studs (B) and, at the same
time, install tube (E) into adapters (F) and (C).
4.
Using 1/2 inch wrench, install four washers (G) and nuts (H) on mounting studs (B).
5.
Using 13/16 inch wrench, install adapter (J) on
fuel pump assembly (D),
6.
Using 7/8 inch wrench, tighten line nut (K) on
adapter (F).
7.
Using 7/8 inch wrench, tighten line nut (L) on
adapter (C).
8.
Using 1/2 inch wrench, install adapter (M).
Go on to Sheet 4
TA141510
7-39