TM9-2350-222-20-1-3
INSPECT FUEL INJECTOR NOZZLES AND HOLDERS (Sheet 2 of 3)
CAUTION
Do not exceed 700 to 750 rpm and do not run engine for more
than 10 minutes at a time. Before restarting, allow engine to
cool.
2.
Start engine (TM9-2350-222-10).
Place hand between nozzle heads (D) and top of holders (E) on each fuel injector. If movement is
3.
felt, stop the engine.
4.
Using torque wrench (F) and open end wrench (G) torque nozzle holders (E) to 42 lb-ft
(57 Nm).
5.
Start engine (TM 9-2350-222-10).
6.
Place hand between nozzle heads (D) and top of holders (E) on each fuel injector. If movement is
still felt, notify support maintenance.
Go on to Sheet 3
7-13
Change 4