OIL COOLERS - CLEANING (Sheet 3 of 3)
Squeeze lever (F) to obtain an air-liquid mixture
and spray fins (E) with cleaning solution. Allow
time for solution to soak between oil cooler fins.
Clean oil coolers by alternately moving cleaner
head (D) from left to right and up and down.
Cleaning solution flows freely through entire oil
If oil coolers were cleaned with
w a t e r to make sure oil cooler
screens are clear.
When oil cooler fins (E) are clean, use hose to
flush with water.
Dry all parts with air by removing-- end of
siphon hose (B) from cleaning solution
container (C) and squeezing lever (F).
Remove engine opening protective coverings.
Close hull drains (TM 9-2350-222-10).
13. Install top deck (page 16-23).
End of Task