TM9-2350-222-20-1-3
TRANSMISSION OIL COOLER SCREEN REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
Position oil cooler screen (A) into place
1.
on oil cooler.
2. Install screw (B) and washer (C).
Position harness and bracket (D) into
3.
place on oil cooler.
Using socket, extension, and ratchet
4.
through harness and into bracket, install
two assembled washer screws (E).
NOTE
You will have bracket (F) and tube (G) only
if your vehicle is equipped with a 2DA
engine.
Position bracket (F) to oil cooler.
5.
Install assembled washer screw (H).
6.
Using socket, tighten screws (B) and
7.
(H).
Using 3/4 inch wrench, install bolt (J).
8.
Using socket, extension, ratchet, and
9.
1/2 inch wrench, install screw (K) and
nut (L) to secure clamp (M) and tube
(G) to bracket (F).
10.
Install both air cleaner outlet hose assemblies
11.
End of Task
All data on pages 6-122 thru 6-129 deleted.
6-121
Change 4