ENGINE ACCESS COVERS (RIGHT BANK) REPLACEMENT (2D ENGINE) (Sheet 3 of 5)
Using socket, remove three screws and washers
(G) securing timing access cover (H) to engine.
Remove timing access cover (H) and fuel line
hose and clamp (J) from cover (H).
Use a suitable container or rags
(Item 65, Appendix D) to catch
fuel leakage when any fuel line
l o o s e n e d or
Using 9/16 inch wrench, disconnect fuel return
hose fitting (K) from union (L).
Using 11/16 inch wrench, remove nut (M)
securing union (L) to access cover (N).
Pull union (L) with hose attached out of access
cover, (Pull union and hose toward rear of
Using socket and extension, remove three
screws and washers (P).
Remove access cover (N).
Go on to Sheet 4