TM 9-2350-222-20-1-3
CRANKCASE BREATHER TEE AND REAR TUBE REPLACEMENT (Sheet 2 of 6)
REMOVAL:
1.
Using screwdriver, loosen two clamps (A)
holding breather tube (B) to exhaust tube (C)
and breather tee (D).
2.
Remove two clamps (A) and breather
tube (B) from vehicle.
3.
Using screwdriver, loosen clamp (E).
4.
Using wrench, remove two screws and
5.
Remove breather tee (D), spacer, and two
gaskets from engine. Throw gaskets away.
6.
Using screwdriver, remove two clamps (E) and
hose (G) from breather tee (D). Throw hose (G)
away.
Go on to Sheet 3
TA249058
Change 2
6-73