MULTIPLE PRESSURE LINE CONNECTOR REPLACEMENT (Sheet 5 of 6)
Position hose E) so that free end passes
LEFT ENGINE SHROUD
through left engine shroud. Using fingers and
screwdriver, position grommet (H) over hose
and into shroud.
Using 1/2 inch wrench and 1/2 inch socket,
secure each hose with loop clamp.
Using 11/16 inch wrench, connect hose
connector (K) to elbow (J) On right
Repeat step 9 on left turbosupercharger to
connect hose (E).
Go on to Sheet 6