MULTIPLE FLUID PRESSURE LINE CONNECTOR REPLACEMENT (Sheet 2 of 6)
Using 1 inch wrench, loosen hose connector (D)
while holding retaining nut (E) with 1-1/8 inch
Remove hose (F) from connector (G).
Using 1-1/8 inch deep well socket wrench,
remove retaining nut (E) and washer from
Using 11/16 inch wrench, loosen hose (H)
and remove it from elbow (J) on the right
Repeat step 5 on left turbosupercharger to
remove other hose.
Go on to Sheet 3