ENGINE OIL FILTER ELEMENT REPLACEMENT (20 ENGINE) (Sheet 5 of 5)
Install filter cover (D), making sure hole (E) is
at the top.
Using socket, remove two screws from holes (H).
Using socket, install ten new self-locking nuts
and washers (F) to secure cover. Do not
overtighten, as stripping may result.
Using socket, install screw and new sealing washer in cover at hole (E).
Using wrench, turn valve (G) clockwise until tight.
Install fire extinguisher line (page 5-21, step 58).
Close engine compartment drain valve (TM 9-2350-222-10).
Replenish engine oil (LO 9-2350-222-12).
Start and run engine (TM9-2350-222-10).
Check for leaks.
Shut down engine (TM9-2350-222-10).
Install upper engine access cover (page 16-40).
End of Task