TRANSMISSION MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 4 of 4)
Using slip joint pliers, install lockwire (Item 59,
Appendix D) (D) between bushing (C) and
Remove from vise and position bracket (A) onto
transmission and, using 3/4 inch socket, install
through mount on transmission into bracket (A).
Leave screws loose.
Position spacer (G) into bracket (A) and install
bolt (H), through spacer (G), through mount (A),
and new lockwasher (J).
With second person using 1-1/2 inch wrench to
hold bolt (H), use 1-1/2 inch socket and torque
wrench to tighten nut (K) to 380 to 415 lb-ft
Position roller (1. ) onto screw (M) and install
screw (M) through bracket (A).
Using bit screwdriver and 1/2 inch drive
ratchet to hold screw (M), use 1-5/16 inch
wrench to install new self-locking nut (N) into
It may be necessary to turn universal
joint to gain access to screws (E).
Using torque wrench and 3/4 inch socket,
tighten screws (E) to 70-75 lb-ft (95-102 Nm).
End of Task
All data on pages 6-13 and 6-14 deleted.