TRANSMISSION MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 2 of 4)
Using diagonal cutting pliers, cut safety wire
(A) and remove it from bushing (B) and bracket
Using remover tool, remove two mounts (D)
from bracket (C).
Using bit screwdriver to hold screw (E), use
1-5/ 16 inch wrench to remove self-locking
nut (F) from screw (E). Throw self-locking
Remove screw (E) and roller (G) from bracket
With second person using 1-1 /2 inch wrench
to hold bolt (H), use 1-1/2 inch socket and
extension to remove nut (J) from bolt (H),
Remove lockwasher (K) and bolt (H) from
bracket (C). Throw lockwasher away.
Go on to Sheet 3