TM 9-2350-222-20-1-3
ENGINE MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 3)
TOOLS:
1-1/16 in. open end wrench
1-1/8 in. socket with 3/4 in. drive
1/2 in. socket with 1/2 in. drive
36 in. extension with 3/4 in. drive
T-slide handle with 3/4 in. drive
SUPPLIES: Dry cleaning solvent (Item 54, Appendix D)
Rags (Item 65, Appendix D)
Lockwasher (MS35338-45) (2 required)
Lockwasher (MS35338-51)
PRELIMINARY PROCEDURE:
NOTE
Removal and installation of left and right engine mounts are
the same.
REMOVAL:
Using 1/2 inch socket, remove two screws (A)
1.
TA139373
Go on to Sheet 2
6-6