FRONT POWERPLANT GUIDE (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 1)
TOOLS: 15/16 in. combination box and open end wrench
15/16 in. socket with 1/2 in. drive
Hinged handle with 1/2 in. drive
Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 Nm)
SUPPLIES: Lockwasher (MS35338-50) (6 required)
T h r e e s c r e w s o n right guide
cannot be loosened or removed
U s e wrench to
r e m o v e screws that cannot be
removed using socket.
Using socket with hinged handle, loosen screws
Using socket or wrench, remove six screws
Remove inner support (B) and front guide (C).
Mount inner support (B) and front guide (C).
Install six screws and new Iockwashers (A).
Using socket with torque wrench, tighten
screws (A) to 111-149 Ib-ft (150-201 Nm).
End of Task
Change 1 6-3