2D ENGINE POWERPLANT TESTS (GROUND HOP) (Sheet 15 of 15)
AFTER TEST DISCONNECT:
Disconnect three battery ground straps (page 10-268).
2. Disconnect four electrical cable assemblies and three hose assemblies from powerplant and hull
Using 7/16-inch socket with ratchet, loosen clamp nut
that secures right ground hop hose assembly clamp.
5. Remove ground hop hose assembly with clamp
and filter from turbosupercharger elbow.
Position air cleaner hose assembly with clamp
to right turbosupercharger elbow.
Using 7/16-inch socket with ratchet, tighten
clamp nut to secure air cleaner hose assembly to
Repeat steps 4 through 7 on left side.
Install universal joints (page 12-14, steps 1
End of Task