2D ENGINE POWERPLANT TESTS (GROUND HOP) (Sheet 4 of 15)
Position ground hop hose assembly with clamp
and filter to right turbosupercharger elbow.
Using 7/16-inch socket and ratchet, tighten
clamp nut to secure hose asssembly to
Repeat steps 7 and 8 on left side.
Assign one crewmember with a fire
extinguisher as a fire guard during all
During these tests, the electrical instruments,
switches and warning lights in the vehicle
will be operative.
All mechanical and
will be inoperative.
It will be necessary
to manually position or actuate the throttle
or shifting control and fuel shut off.
Connect battery ground straps
Go on to Sheet 5