TM 9-2350-222-20-1-3
POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 15.1 of 23)
NOTE
When powerplant is in place, the
universal joint a n d final drive
adapter will be axially alined.
12.1. While slowly lowering powerplant, aline
universal joint so lip enters tool guides.
WARNING
Do not place your hands inside the
engine compartment. Serious injury
m a y result if power-plant shifts
unexpectedly.
12.2. Using pry bar or rope, rotate universal joint to
aline splines with final drive adapter splines.
guide shields, and retrieve final drive adapter
hook-up tool.
Check that powerplant is correctly seated.
14.
Check all clearances around powerplant.
15.
Remove four engine and transmis-
sion sling hooks from four power-
plant lifting eyes.
Go on to Sheet 16
Change 4
5-38.2