POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 5.1 of 23)
Using screwdriver, loosen two clamps
(R) securing two air cleaner outlet
Disconnect two air cleaner hoses (S).
Cover hose end openings.
If your vehicle is equipped with a 2DA
engine, do steps 14.1 and 14.2. If not,
proceed to step 15.
Using screwdriver, loosen two clamps (T).
14.2. Slide hose (T.1) off manifold (T.2) and
back onto tube (T.3).
Go on to Sheet 6