Push pedal (1) down to increase the engine speed.
Release the pedal to decrease the engine speed.
Turn wheel (1) to the right to steer the machine to the
right. Turn the wheel to the left to steer the machine
Transmission Control Lever
NEUTRAL (1)Move the lever into the detent
position marked N to put the transmission
Forward (2)Move the lever forward to select one of
six forward transmission speeds, marked 1 through
When the machine is in EARTHMOVING mode, the
transmission is limited to three forward speeds. Each
speed is manually selected. If the transmission control
lever is placed in any position above 3, the
transmission will remain in third gear.
When the machine is in SELF-DEPLOY mode, there
are six forward speeds. The transmission will
automatically shift between first gear and the
maximum gear selected.
Reverse (3)Move the lever to the rear to
place the transmission into one of two reverse
speeds, marked R1 and R2.