Coat hook (1) is located in the right rear corner of the
Rear Windshield Guard
To raise rear windshield guard (1), pull out sharply on
the lower corners to release the guard from the rubber
fasteners. Raise the guard and allow it to rest on the
top of the cab.
To lower rear windshield guard (1), raise the guard off
the top of the cab and rotate it down in position over
the rear window. Press sharply on the lower corners of
the guard to secure it in rubber fasteners (2).
NOTE: Rear windshield guard (1) provides protection
for the operator when the winch is operated. The rear
windshield guard should only be raised to clean or
replace the rear windshield. At all other times, the rear
windshield guard should be lowered and secured in
rubber fasteners (2).
Operation of the winch while rear windshield guard
(1) is in the raised position could result in injury or
Monitoring Systems and Cab Features