Transmission Controller Diagnostic Port
Port (13) is used by maintenance trained personnel to
diagnose and calibrate the EPTC II.
Horn Enable Switch
ON (14)Move the switch into the ON
position (up) to enable the horn and backup
alarm.
OFF (15)Move the switch into the OFF
position (down) to disable the horn and backup
alarm.
NOTE: The blackout light switch must be in the
SERVICE DRIVE or STOP LIGHT position for the horn
and backup alarm to operate.
Work Light Switch
ON (16)Move the switch up to turn on the
front (18) and rear (19) working lights.
OFF (17)Move the switch down to turn off
the working lights
NOTE: The blackout light switch must be in the
SERVICE DRIVE or STOP LIGHT position for the work
lights to operate.
19
18
18
17
16
15
14
13
20
Operation Section
Monitoring Systems and Cab Features
TM5-2430-200-10