Inspect for Wear or Damage
Seat belt (1) and mounting hardware (2) must be
inspected for wear, damage and expiration before the
machine is operated. Have Unit Maintenance replace
the belt or mounting hardware if worn, damaged or
The seat belt must be replaced after three years of
use, regardless of appearance. Tag (4) is sewn into
the belt. Fully extract the belt and check the date on
the tag. If the date on the tag is more than three years
prior to the current date, report the seat belt to Unit
Maintenance for replacement.
Adjust seat position (3) so that all of the machines
controls are easy to reach.
Check Oil Level
1. Open air filter compartment door (1) on the left side
of the machine.
2. Maintain the oil level between ADD (4) and FULL (5)
marks on dipstick (2) with the engine stopped. The
oil level should be checked when the engine is cold.
NOTE: When operating on severe slopes, the oil level
in the engine must be at the FULL mark on dipstick (2)
when the machine is on level ground.
FULL RANGE ENGINE STOPPED
Every 10 Service Hours or Daily