Change 3 4-871
A Remove four screws (1), washers (2), screw
(3), washer (4), and access panel (5) from
hull and bump stop frame (6).
High pressure is present in the
hydraulic system. Do not disconnect
any hydraulic system component
unless hydraulic system pressure
has been relieved. After hydraulic
system pressure has been relieved,
wait at least 4 minutes before
disconnecting any hose or fitting.
Failure to comply may result in severe
injury to personnel.
B Disconnect two hoses (7) from elbows (8) at
bump stop assembly (9). Plug hose (7) and
cap elbow (8) openings.
C Lift bump stop assembly (9) off seat of hull,
and remove bump stop assembly (9) through