TM 9-2350-222-20-1-4
PARKING BRAKE CONTROL ASSEMBLY REPLACEMENT (ENGINE COMPARTMENT)
(Sheet 2 of 15)
REMOVAL:
NOTE
Except as noted, replacement of left or right control assembly
is same.
1.
Using 7/16 inch socket and 7/16 inch wrench, remove screw (A), lockwasher (B), and nut (C).
Throw lockwasher away.
2.
Remove clamp (D) from control assembly.
3.
Using 3/4 inch socket, remove nut (E) and lockwasher (F). Throw lockwasher away.
4.
Remove bracket (G).
5.
Using 3/4 inch socket and extension, remove nut (H) and lockwasher (J). Throw lockwasher away.
6.
Remove clamp (K) from stud and control assembly.
Go on to Sheet 3
TA140391
13-85