TM 9-2350-222-20-1-4
BATTERY TESTING AND REPLACEMENT (Sheet 5 of 13)
10. Readings between cells of any one battery must be within 0.025 of each other. If they are not,
replace battery,
1.
Locate three battery ground cable terminals (A).
2.
Using 1/2 inch box wrench on nut (B) and 1/2
inch open end wrench on bolt (C), loosen nut (B)
and bolt (C) on three battery ground cable
terminals (A).
CAUTION
As each cable is removed, cover
b a t t e r y ground cable with rags
and position cable to prevent
contact with battery box or
batteries to prevent arcing.
3.
Using battery terminal puller, remove three
battery ground terminals (A) from battery post
(D). Lay terminals and cables aside.
TA139844
10-293