TM 9-2350-222-20-1-4
HYDRAULIC PUMP INDICATOR LIGHT REPLACEMENT (Sheet 1 of 1)
TOOLS: Flat-tip screwdriver
REMOVAL:
1.
Disconnect connector (A) from indicator light
--
(B).
2.
Turn lens (C) counterclockwise. Remove lens
(C) and gasket (D).
3.
Using screwdriver, remove two screws (E).
4.
Remove indicator light (B) from bracket (F).
INSTALLATION:
1.
Position indicator light (B) in bracket (F), and
start two screws (E).
2.
Using screwdriver, start two screws (E).
3.
Install gasket (D) and lens (C) on indicator light.
Turn lens clockwise until tight.
4.
Install connector (A) on indicator light (B).
End of Task
TA139717
10-161