TM 9-2350-222-20-1-4
INSTRUMENT PANEL CLUSTER ASSEMBLY REPAIR (Sheet 14 of 22)
Transmission Oil Temperature Indicator Replacement (Sheet 1 of 2)
TOOLS: 3/8 in. combination box and open end wrench
SUPPLIES: Silicone compound (Item 32, Appendix D)
Lockwasher (MS35338-43) (2 required)
PRELIMINARY PROCEDURE:
REMOVAL:
1.
Remove two leads (circuits 324 and 27) from rear of indicator (A) by pulling out.
2.
Using wrench, remove two nuts (B) and lockwashers (C) securing indicator (A) and mounting
Remove indicator (A), mounting bracket (D), and bezel (E).
3.
INSTALLATION:
1.
Apply silicone compound (Item 32, Appendix D) to two indicator (A) electrical connectors.
Go on to Sheet 2
TA139697
10-141